Dual-flow solenoid valve
Electric machine
linear actuation series
Pneumatic
and hydraulic part series
Armored material
Thermal couple / resistance
Hot runner system
Other Products
 
 
 
 
 
Summary

 

The dual-flow solenoid valve is used for the max/min. flow control in the computer refueling machine to realize quick and efficient refueling and flow metering. The suitability medias are gasoline, diesel, kerosene which are explosion proof.

 
DV1050J-M33 Dual-flow solenoid valve (M33*1.5 outer thread)
  DV1050J-06 Dual-flow solenoid valve (G3/4" Inner thread)
FDV1050J Dual-flow solenoid valve (Flange type)
  Technical requirements
 
Media:
fuel oil, gas, water
Ambient temperafure
-40°~+55°
Pressure range
0.35Mpa(Max.) 0.035Pma(Min.)
Leakage
0
Flow
(Closing pressure 0.175Mpa)
(Opening pressure 0.115Mpa)
>40L/min (Max flow)
 
Operation mode 100%
Explosion-proof mark
Over monentum(Closing time) Set pre-momentum 0.5L
Opening pressure 0.115Mpa <0.3L
Voltage input 220VAC 50Hz
Voltage deviation
Relative humidity
Insulation strength
Lead length 1.5m(Standard)
Power 2*5.5W
Coil class H
G1dv1050 Dual-flow solenoid valve (Flange type)
  This valve, the passing cablibre of cohich is enlarged and the flow is increased to 90L/min, is more suitable for the refuelling machine with much big flwo.
  Technical requirements
 
Media:
fuel oil, gas, water
Ambient temperafure
-40°~+55°
Pressure range
0.35Mpa(Max.) 0.035Pma(Min.)
Leakage
0
Flow
(Closing pressure 0.175Mpa)
>60L/min (Max flow)
Operation mode 100%
Explosion-proof mark
Opening time <450ms
Closing time <450ms
Voltage input 220VAC 50Hz
Voltage deviation
Relative humidity
Insulation strength
Lead length 1.5m(Standard)
Power 2*5.5W
Coil class H
FDV1050JB-06 back type dual-flow soleniod valve
 
Media:
fuel oil, gas, water
Ambient temperafure
-40°~+55°
Pressure range
0.35Mpa(Max.) 0.035Pma(Min.)
Leakage
0
Flow
(Closing pressure 0.175Mpa)
(Opening pressure 0.115Mpa)
>42L/min (Max flow)
 
3.5-4L/min
Operation mode 100%
Explosion-proof mark
Over monentum(Closing time) Set pre-momentum 0.5L
Opening pressure 0.115Mpa <0.3L
Voltage input 220VAC 50Hz
Voltage deviation
Relative humidity
Insulation strength
Lead length 1.5m(Standard)
Power 2*5.5W
Coil class H
SDV1050-M332*1.5
 
Media:
fuel oil, gas, water
Ambient temperafure
-40°~+55°
Pressure range
0.35Mpa(Max.) 0.035Pma(Min.)
Leakage
0
Flow
Single gun>40L/min (Max flow)
Double gun>33L/min (Max. flow)
(Closing pressure 0.175Mpa)
Operation mode 100%
Explosion-proof mark
Opening time <300ms
Closing time <300ms
Voltage input 220VAC 50Hz
Voltage deviation
Relative humidity
Insulation strength
Lead length 1.5m(Standard)
Power 2*5.5W
Coil class H
   
   
   
   
   
 
Copyright 2008 CHUNHUI Group, All Rights Reserved.